No additional water/ingredients needed!
StrucSol HS Grout is a high strength, Non-Shrink polymer modified grout.
For bonding StrucSol UltraBar, metal bar, anchors, ties into brickwork, stonework and concrete. HS grout is specially formulated for use in crack stitching and masonry beaming. The grout is provided in a two part pack containing powder and fluid, which are whisked together in the bucket provided. No added water is required. The grout is designed to be gun-applied using our StrucSol Grout gun
HS grout has a working life of around 30mins. Once mixed HS grout has a rapid strength gain, ensuring repair is at full strength within 14 days. Comes in a 5KG Pack.
6.5KG of HS grout is sufficient to install approximately 12m of single 6mm Ultra bar in a 10mmx30mm joint (linear meterage will increase or decrease dependent on bed joint depth and width)
6.5KG of HS grout is sufficient to install approximately 7lm of twin 6mm Ultra bar in a 10mm x40mm deep joint (linear meterage will increase or decrease dependent on bed joint depth and width)